Home > News > Industry News

Industry News

The Garden Tools of Brush Cutter And Plow

2016-04-21

How to Use a Brush CuBrush cuttertter. A brush cutter is a lawn and garden tool used to trim lawn edges, cut back bushes and unruly plants, and maintain a landscape. A brush cutter relies on rotary device that spins a dense plastic string. Spun at a high speed, the string cuts through any vegetation you wish to prune or remove.

Check that the brush cutter has a sufficient amount of string. Locate the rotary device, found at the end of the brush cutter opposite the handle and motor. The oval rotary device will have two or more holes on its side, out of which protrudes the plastic string. Remove the cover and look inside to check that there are several wraps of string around the device.

Check that the brush cutter has gasoline in its engine. The engine is found at the end of the tool opposite the rotary device. Remove the gas cap and look inside. If the gasoline levels appear low, top off the reservoir with gasoline using a funnel to prevent dripping. Close the gas cap.

Apply the besom cutter to the plants and frondescence that you wish to abolish or trim. Hold the besom cutter's arch several inches abroad from the bulb and rev the engine. The artificial cord in the rotary accessory will cut aback the plant. Move the apparatus aback and alternating in slow, across-the-board motions if you are acid down swaths of plants, such as grass in a field.

Parts of a Plow. Plows date aback to afore 1,000 A.D. Since the aboriginal break was invented, abounding advances accept occurred in the development of this tool. Man-powered plows began to be pulled by oxen in 3,500 B.C, eventually affective from oxen to horses. In 1912, the tractor was developed from the architecture of the plow. Advancements are still getting fabricated for this agriculture tool.

The absolute break is the section that cuts through the soil, creating a aperture in which seeds can be planted. The plowline is the basal point that the aperture created by the break reaches.

The coulter is the part of the plow that cuts vertically through the soil. It is an iron blade secured to the beam right in front of the moldboard.More information, please visit: http://www.vertak.com/