Home > News > Industry News

Industry News

How to Remove Rust from Rusty Garden Tools


As a rule, if properly used and stored, a high quality garden tool may last a lifetime. However, if not, it may easy to develop rust, and so you need to pay extra to replace it. Then, is a rusty garden tool really useless once it has rust on the surface? Definitely no! In fact, it is mistake for most people that throw out the rusty garden tools immediately once found they are rusty. As a matter of fact, just with a few methods to remove the rust, can these tools get back to work perfectly.

First method, soak rusty tools in a weak vinegar solution. If your tools are rusty, try soaking the metal parts in a weak vinegar solution (1:1) for 24 hours. Try using a cheap distilled white vinegar from the grocery store for this. And then, remove them from the solution and wipe down with paper towel to dry them, clean the rust off with steel wool. Well, if you have heavily rusted blades, you may need to soak them once more after the first layer of rust comes off.

Another method is to use a citric acid solution to remove rust. Some gardeners prefer to use a 3 % citric acid solution instead of vinegar, and this is also good for making up large quantities for cleaning large parts and tools. When finished, be sure to clean the residue away with plenty of clean water after soaking. However, this method should be avoided if you are cleaning parts like brakes or engine blocks as they can become brittle in the citric acid solution.

Alternatively, soak the tools in strong black tea or cola. Other gardeners recommend using very strong black tea or even cola instead of vinegar to remove rust. Soak your tools in it, then rub them clean with a rag or wire wool to remove rust. You can also try using some scrunched aluminum cooking foil and a little water to take the rust off.

Besides, try to minimize the amount of scraping you do when removing rust. In practice, light circular motions, repeated for as long as necessary, are the best way to remove rust without thinning or scratching the metal beneath. With this method, you are advised to wear protective gloves, eye wear and a face mask. And it’s also a good idea to make sure your tetanus vaccination is still providing protection.

Choose any methods above to remove the rust off your rusty garden tools, and if you want them works as perfectly as before, you are then going to sharpen them. There are a few options for sharpening tools: you can use a whetstone, flat file or sharpening steel. If you are using a whetstone, start by wetting it thoroughly. You can use mineral or motor oil if you prefer instead of water. Without pressing especially hard, stroke the whetstone in one direction along the side of the edge. Replenish either oil or water as required if the stone surface dries out.

Finally, after removed the rust and sharpened the garden tools, you would like to test them before actually use them. Testing them on small plants to decide whether they are good enough to get back to work.Please visit: http://www.vertak.com/ to see more information.